Haining Qiruite Photoelectric Co., Ltd.
Haining Qiruite Photoelectric Co., Ltd.
Add to Cart
Solar water heater structure material: INOX SUS201
Structure thickness: 1.2mm
Structure Angle: 27 degree
Tube distance: 75mm or 80mm.
More options:
1, Many kinds structure for choosing
2, material option: glavanized steel
3, Angle option: 10 degree, 20 degree, 38 degree, 45 degree.
4, models: from 8 tubes to 36tubes
Stainless Steel Solar Hot Water Heater Features
1. Itelligent solar water heater system--Can he operated completely automatic if connect with intelligent controller.
2. simple design solar water heater-Simple structure, easy plug-in installation, can be installed both on flat and inclined roof.
3. Can be used with an auxiliary electric booster as to provide hot water without sunshine.
4. Superior heat preservation ensured by one-off molding polyurethane foam with thickness 55mm.
5. Suitable for camping area, holiday residences.
6. Stable and reliable performance, well wind resistance.
7. Meet the mankind healthy bath standard: The material of inner tank is SUS304-2B stainless steel plate.
8. The silicon ring sealing has a long life against the erosion and it not harmful to health.
9, Cheap and reliable hot water soution, non-pressurized solar water heater widely used in China, India, Mexico, South Africa market.
10, Eco-friendly and energy saving water heater.
11, long life time solar water heater tank, frame and vacuum tube: the use time more than 10 years.
Stainless Steel SOLAR HOT WATER HEATER Package: poly bag wrapped, Styrofoam underlay, export carton packed.
SOLAR WATER HEATER CARTONS
SOLAR HOT WATER HEATER LOADING QUANTITY GUIDE(20'GP container, 40'GP container, 40'HQ container)
| Model | Tube Specification | Capacity | Loading quantity | ||
| 20'GP | 40'GP | 40'HQ | |||
| (Liter) | (Sets) | (Sets) | (Sets) | ||
| CNS-58-10 | Φ58mm*1800mm | 100 | 73 | 151 | 178 |
| CNS-58-12 | Φ58mm*1800mm | 120 | 64 | 133 | 155 |
| CNS-58-15 | Φ58mm*1800mm | 150 | 53 | 110 | 130 |
| CNS-58-18 | Φ58mm*1800mm | 180 | 45 | 94 | 110 |
| CNS-58-20 | Φ58mm*1800mm | 200 | 41 | 85 | 100 |
| CNS-58-25 | Φ58mm*1800mm | 240 | 36 | 75 | 88 |
| CNS-58-30 | Φ58mm*1800mm | 300 | 28 | 59 | 70 |
| CNS-58-36 | Φ58mm*1800mm | 360 | 24 | 50 | 59 |
| Technical parameter of Stainless steel non pressure solar water heater | |
| DESCRIPTION | Stainless steel Non-pressurized solar water heater |
| CAPACITY(TUBES-LITER) | From 6tubes-60liter to 50tubes-500liter |
| MATERIAL OF OUTER TANK | 0.4mm SUS201 stainless steel /0.4mm sus304-BA(bright) |
| MATERIAL OF INNER TANK | 0.4mm/0.5mm/0.6mm SUS304-2B stainless steel or sus316 stainless steeel |
| TANK INSULATING LAYER | 50-60mm high-density polyurethane foamed |
| DIAMETER OUTER/INNER TANK | 420/310mm 460/360mm 470/360mm 480/360mm |
| ELECTRICAL HEATER | 1500w/2500w/3000w; 220v/110v |
| INLET AND OUTLET HOLE | Male 1/2", 3/4" |
| MAX PRESSURE | 0.05 mpa |
| SOLAR COLLECTOR TUBE | 3.3 borosilicate glass with AL/AL-ALN/ALN(single target) or CU/SS-ALN/ALN(three target) |
| THICKNESS OF GLASS TUBE | 1.6mm |
| VACUUM TUBETIGHTNESS | P≤ 0.005 pa |
| ABSORPTION | As=0.93-0.96(am1.5) |
| EMISSION RATIO | Ε h=0.04-0.06(80c± 5c) |
| IDLE SUNNING PROPERTY PARAMETERS | Y=220~260m². C/kw |
| AVERAGE HEAT LOSS COEFFICIENT | Ult=0.6~0.7w/(m2. c) |
| BRACKET: | 1.2mm Stainless steel/1.6mm aluminum alloy/1.5mm galvanized steel |
| STRUCTURE OF TANK: | Usually holes for air vent, overflow, water inlet and outlet, electric heater; custom-built will be warmly welcomed. |
| WELDING: | Automatic argon arc welding |
| FASTENING PIECES: | Stainless steel screw |
| SEAL MATERIAL | Stabilized high temperature silicon |
| OPTION-1(WITHOUT ELECTRICAL HEATER): | Assistant tank 3L, 5L, 8L,12L,30L,50L as a automatic watering part. |
| OPTION-2(WITH ELECTRICAL HEATER): | Electrical heater as extra built-in heating part, controller control the system watering and heating automatically |